Pro Softener Mate – Softener Resin Cleaner 113g (4oz)

Mains water contains natural impurities that can reduce the efficiency of your softener.

Softener Mate is specially formulated for water softeners to remove limited iron, manganese, silt, metal particles, organic compounds and bio-film build up from inside the resin cylinder of your softener, using a unique blend of environmentally-friendly chemicals.

This is an USA product and the usage instructions written for larger Water Softeners than the average UK domestic Softener. We recommend you dilute one packet in one litre of warm water, then pour into your salt tank when the salt level is low and start a manual regeneration.

For larger/commercial Water Softeners, use one packet/diluted in one litre of warm water for every 18kgs of salt capacity (upto 3 packets), and pour directly into the brine well.

For Block Salt / Twin Tank Softeners, you may need to pour the diluted solution into both Salt tanks and carry out two manual regenerations. Consult your Water Softener manufacturer/supplier before use if in doubt.

Replacement 10mm diameter standard Water Softener Inlet/Outlet hose.

• 1000mm hose length.
• 3/4″ BSP Female Elbow and 3/4″ BSP Female Straight connections.
• Captive Washers
• Suitable for all Water Softeners.
• Maximum pressure – 10 Bar at 20°C and 6 Bar at 65°C.
• Food Grade Reinforced PVC hose.
• WRAS Approved.

Replacement Water Softener Inlet/Outlet hose. Hi-Flow 12mm diameter hose is suitable for use with Combi boilers and other mains fed systems.

• 1000mm hose length.
• 3/4″ BSP Female Elbow and 3/4″ BSP Female Straight connections.
• Suitable for all Water Softeners.
• Maximum pressure – 10 Bar at 20°C and 6 Bar at 65°C.
• Food Grade Reinforced PVC hose.
• WRAS Approved.

Pro Rust Out – Softener Resin Cleaner 113g (4oz)

Maintains the performance of Water Softeners on Iron bearing water:

Rust Out softener rust remover chemically removes iron and rust build-up that coats the resin beds and fouls the softener. This iron build-up is not totally removed during normal regeneration of a water softener. Using Rust Out softener rust remover in a water softener will eliminate rust and foreign matter from the resin bed which increases the life of the softener and reduces rust staining on household fixtures and other surfaces. We recommend using the softener rust remover regularly as preventative maintenance to ensure the softening and recharging efficiency of the softener’s resin bed. Additionally, in applications where iron is present you can use our well water formula to fight annoying rust stains.

This is an USA product and the usage instructions written for larger Water Softeners than the average UK domestic Softener. We recommend you dilute one packet in one litre of warm water, then pour into your salt tank when the salt level is low and start a manual regeneration.

For larger/commercial Water Softeners, use one packet/diluted in one litre of warm water for every 18kgs of salt capacity (upto 3 packets), and pour directly into the brine well.

For Block Salt / Twin Tank Softeners, you may need to pour the diluted solution into both Salt tanks and carry out two manual regenerations. Consult your Water Softener manufacturer/supplier before use if in doubt.

Our simple plastic salt scoop, in white food grade plastic.

Check how well your softener is working or adjust the softness settings. Simple to use colour change tablet test kit for water hardness levels or YES/NO softness testing.

Contains 20 tablets.

6 in 1 Quarter Turn Multi Tap – Suitable for Water Softener Drinking Water Taps and Filter Systems. An ideal replacement for a broken or worn tap.

This unique tap brings 6 combinations in one box:
3 different handles and 2 different spouts means that just one product will provide a choice of 6 styles – see gallery picture.

This tap kit comes with:
– Quarter turn ceramic disc operation as well as the popular pushfit stem for easy connection.
– Push fit connections to suit most existing flexible pipes, 3/8″ and 1/4″ tube.
– Spacers and washers to fit a variety of installations.

Drinking water filter replacement cartridge. Fits most standard 10″ filter housings. Filters down to 5 microns to improve taste and appearance of mains water with very good chlorine reduction. (Colour may vary with different suppliers).

– Chlorine, Taste and Odour removal

– Certified NSF/ANSI Standard 42 – NSF

– Performance tested and verified by Independent laboratory testing

– Certified by ISO 9001

– 2.5” Width and 10” Length

Our most popular drinking water filter replacement cartridge. Fits most standard 10″ filter housings. Filters down to 5 microns to improve taste and appearance of mains water with very good chlorine reduction. (Colour may vary with different suppliers).

Hydro+ GAC Filter with Scale Inhibitor – H11SB

Hydro+ inline water filter – 10″, which contains granular activated carbon (GAC) for taste, odour and chlorine reduction and a polyphosphate scale inhibitor for limescale control. Features 3/8″ spigot connections.