Your shopping cart is empty!
CLOSE
£18.00
Our most popular drinking water filter replacement cartridge. Fits most standard 10″ filter housings. Filters down to 5 microns to improve taste and appearance of mains water with very good chlorine reduction. (Colour may vary with different suppliers).
Replacement 10mm diameter standard Water Softener Inlet/Outlet hose.
Omnipure K2533 KK 3/8″ Push Fit Carbon Filter. Has built in 3/8″ Push Fittings at each end for inline connections. […]
Pro Rust Out – Softener Resin Cleaner 113g (4oz)
Maintains the performance of Water Softeners on Iron bearing water:
Rust Out softener rust remover chemically removes iron and rust build-up that coats the resin beds and fouls the softener. This iron build-up is not totally removed during normal regeneration of a water softener. Using Rust Out softener rust remover in a water softener will eliminate rust and foreign matter from the resin bed which increases the life of the softener and reduces rust staining on household fixtures and other surfaces. We recommend using the softener rust remover regularly as preventative maintenance to ensure the softening and recharging efficiency of the softener’s resin bed. Additionally, in applications where iron is present you can use our well water formula to fight annoying rust stains.
This is an USA product and the usage instructions written for larger Water Softeners than the average UK domestic Softener. We recommend you dilute one packet in one litre of warm water, then pour into your salt tank when the salt level is low and start a manual regeneration.
For larger/commercial Water Softeners, use one packet/diluted in one litre of warm water for every 18kgs of salt capacity (upto 3 packets), and pour directly into the brine well.
For Block Salt / Twin Tank Softeners, you may need to pour the diluted solution into both Salt tanks and carry out two manual regenerations. Consult your Water Softener manufacturer/supplier before use if in doubt.
6 in 1 Quarter Turn Multi Tap – Suitable for Water Softener Drinking Water Taps and Filter Systems. An ideal replacement for a broken or worn tap.
This unique tap brings 6 combinations in one box:
3 different handles and 2 different spouts means that just one product will provide a choice of 6 styles – see gallery picture.
This tap kit comes with:
– Quarter turn ceramic disc operation as well as the popular pushfit stem for easy connection.
– Push fit connections to suit most existing flexible pipes, 3/8″ and 1/4″ tube.
– Spacers and washers to fit a variety of installations.
