Omnipure Q5686 GAC Filter

Drinking water filter replacement cartridge. Fits most standard 10″ filter housings. Filters down to 5 microns to improve taste and appearance of mains water with very good chlorine reduction. (Colour may vary with different suppliers).

– Chlorine, Taste and Odour removal

– Certified NSF/ANSI Standard 42 – NSF

– Performance tested and verified by Independent laboratory testing

– Certified by ISO 9001

– 2.5” Width and 10” Length

Hydro+ GAC Filter with Scale Inhibitor – H11SB

Hydro+ inline water filter – 10″, which contains granular activated carbon (GAC) for taste, odour and chlorine reduction and a polyphosphate scale inhibitor for limescale control. Features 3/8″ spigot connections.

Pro Softener Mate – Softener Resin Cleaner 113g (4oz)

Mains water contains natural impurities that can reduce the efficiency of your softener.

Softener Mate is specially formulated for water softeners to remove limited iron, manganese, silt, metal particles, organic compounds and bio-film build up from inside the resin cylinder of your softener, using a unique blend of environmentally-friendly chemicals.

This is an USA product and the usage instructions written for larger Water Softeners than the average UK domestic Softener. We recommend you dilute one packet in one litre of warm water, then pour into your salt tank when the salt level is low and start a manual regeneration.

For larger/commercial Water Softeners, use one packet/diluted in one litre of warm water for every 18kgs of salt capacity (upto 3 packets), and pour directly into the brine well.

For Block Salt / Twin Tank Softeners, you may need to pour the diluted solution into both Salt tanks and carry out two manual regenerations. Consult your Water Softener manufacturer/supplier before use if in doubt.

Sturdy but lightweight plastic salt scoop. Its enclosed design helps reduce any spillages. 15cm x 15cm x 22cm approx.

Avaliable in blue, green, pink, purple and translucent.